Solid State Logic AWS 900+ SE, Owner'S Manual

Page: 81 / 171

Channel Functions
AWS 900+ SE Owner’s Manual
5-11
Setting Sends Pre/Post Fader
When working with sends it is useful to be able to flip a send between pre and post fader.
If necessary select the
PRE/POST button on the Master Control Panel.
Pushing a channel D-Pot will now switch the selected send on that channel between pre and post.
The green LED below the D-pot lights to show PRE is selected.
To change mode on all channels press and hold the
OPT button then press any channel D-Pot. All channels will
switch to Pre or Post.
Muting a Send Output
To mute a send output select the MUTE button on the Master Control Panel and push the channel D-Pot. The
green LED below the channel D-Pot will light to show the channel is muted.
To mute or un-mute all channels press and hold the OPT button then press any
channel D-Pot. All channels will mute or un-mute.
Flipping Send Levels to the Faders
To flip Send levels from the D-Pots to the channel faders, press the Master Send
D-Pot
marked ‘Push to Flip’).
The channel faders now control the send levels and the fader CUT button will
mute the send.
The channel D-Pot controls panning on stereo sends.
In this mode
PRE/POST mode is automatically selected for the D-Pot switches,
so pushing a D-Pot will toggle the Send pre/post selection on that channel. The
green LED below the D-Pot lights to show PRE is selected.
The fader
SOLO button will solo the channel, not the send.
2
4
4
G t r
SOLO CUT
S n d A
SEL
SOLO
CUT
14
15
16
17
18
19
16
15
14
18
17
19