Solid State Logic AWS 900+ SE Owner'S Manual Download Page 79

Page: 79 / 171

Channel Functions

Channel SEL Button – Track Arming/Edit/Select

The function of the channel SEL

button depends on the mode selected on

the centre section RDY, EDIT and SEL keys on the Master Control Panel.

Record Ready Mode

RDY

is selected all 24 channel

SEL

buttons become Record Ready buttons.

Pressing a channel

SEL

button puts the DAW track into Record Ready (provided

that the DAW track has an input routed). The

REC

tally above the meter flashes

to show that the track is in ready.

Ready All

Track arming can be set or cleared across all channels by using the master RDY
ALL button. This button flashes if any DAW tracks are in Record Ready. Pressing
this switch while it is flashing will clear all track arming.

Record Safe

To put a DAW track into Record Safe (so it cannot be put in to Ready) hold down

ALT

and press the channel

SEL

button. Hold down

ALT + OPTION

then press any

SEL

button to set all tracks to Record Safe.

Edit Mode

With

EDIT

mode selected the channel

SEL

button can have a number of functions:

This function will only work for the first 8 DAW channels in Pro Tools V6.4 and above.
Provided

BYPASS

is off pressing one of the channel

SEL

buttons assigns the plug-in editor to that channel.

The

EDIT

tally on that channel will light to confirm that this is the

EDIT

channel. See page 5-18 for more details.

A double press on the

SEL

button will select the first plug-in in that channel for editing. Successive double presses

will select the next plug-in in that channel.
Selecting the

BYPASS

button on the Master Control Panel changes the channel

SEL

buttons to

BYPASS

buttons. Pressing a channel

SEL

switch will bypass

all

plug-ins on that channel. The channel

EDIT

flag will light to

show that all plug-ins are bypassed.

G t r

SOLO

CUT

S n d A

SEL

SOLO

CUT

CHANNEL

OUTPUT

ASSIGN

AUX2

PAN

SEND

INPUT

RDY

SEL

Push to Flip

MEM

ALT

STATUS

TRANS

MIX

EDIT

UNDO

ESC

SAVE

SHIFT

CTRL

OPTION

ALT

SUSPEND

AUTO

RDY

ALL

ENTER

MUTE

DEFAULT

BYPASS

PRE/POST

CHANNEL

AWS 900+ SE Owner’s Manual

5-9

14
18

Summary of Contents for AWS 900+ SE












































































































































































Search results

Summary of Contents for AWS 900+ SE

Reviews:

Brands by name

Popular brands

Solid State Logic AWS 900+ SE, Owner'S Manual

Search results

Summary of Contents for AWS 900+ SE

Reviews:

Brands by name

Popular brands