TCS-110
T
EMPERATURE
C
ONTROL
S
TAGE
P
RODUCT
M
ANUAL
52-13129-1
S
OLID
S
TATE
C
OOLING
S
YSTEMS
,
167
M
YERS CORNERS
R
OAD
,
W
APPINGERS
F
ALLS
,
NY
12590
10
T
ELEPHONE
:
(845)
296-1300
F
AX
:
(845)
296-1303
WEB
:
V
ERSION
E6
1.
Open the GUI and click on the “Com Setup” button on the yellow taskbar at the top of the GUI.
2.
In the “Ethernet Setup” section of the Com Setup window, enter “10001” in the Port # box. If
you are connected to the unit directly from your computer, enter “192.168.1.88” in the TCP
Client Address box. If you are connected to the unit through a router or server, enter the IP
address of the TCS-110 which is specified in the final test sheet that was shipped along with the
unit.
Figures 5 & 6: Com Setup for Direct Connection (above), for Router/Server Connection (below).
3.
Click “Connect”. If a window appears saying “Connection Established”, proceed to Step 4. If
this does not occur, your computer has assigned a new IP address to the TCS-110. To find what
this address is, see Section 4.5.1 for help troubleshooting the Ethernet connection.
4.
Close out of the Com Setup window and in the upper-left hand corner of the GUI, click “OPEN”.
A window will momentarily appear saying “Downloading Controller Data… Please Wait”, after
which the TCS-110 will commence communication with the GUI and data will appear on the
GUI.
