SOLID AIR CPL 1400, Instructions Manual

Page: 47 / 55

47
SOLID AIR ® INTERNATIONAL • T +31 598 36 12 21 • www.solid-air.com • contact@solid-air.nl
Key for terminal strip X4
No. FeBeSy Symbol Description
2(
bGLxXX
Interface module: (accessory) LON, Modbus/KNX, BACnet or Ethernet.
Only present/available for the following unit designs:
- All except “without control” designs.
3)
bBExMF
“BMK-F” remote control unit (accessory)
Only present/available for the following unit designs:
- All except “without coil” designs.
3!
bBExMK
Programming unit for wall mounting (loose in external units)
only present/available for the following unit designs:
- All except “without control” designs.
3@
Terminal box (socket) (onsite)
BMK-F is connected in parallel with onsite terminals.
3#
Power supply, auxiliary module, 24VDC, max. 0.5A, (onsite, accessory).
Only present/available for the following unit designs:
- all except “without coil” designs.
3$ sTLxRA
Room temperature sensor (accessory), required for special functions like night ventilation,
preheat programme, etc.
Only present/available for the following unit designs:
- All except “without coil” designs.
3%
aVRxEH
Heating actuator, (or actuator for heating and cooling for change-over coil), variable, 24V (onsite),
only present/available for the following unit designs:
1400 PWW + PCW, 1400 PWW + WP, 2400 PWW + PCW,
2400 PWW + WP, 3300 PWW + PCW, 3300 PWW+WP, 4700 PWW + PCW,
4700 PWW + WP, 6100 PWW + PCW, 6100 PWW + WP.
3^
aVRxKU
Cooling actuator, variable, 24V, (onsite) only present/available for the following unit designs:
1400 PWW + PCW, 1400 e.coil + PCW, 2400 PWW + PCW,
2400 e.coil + PCW, 2400 PWW + PCW,
3300 e.coil + PCW, 4700 PWW + PCW, 6100 PWW + PCW.
3&
aMSxAU Servomotor, outdoor air, 24V, 0-10V, (optional).
3*
aMSxFO Servomotor, exhaust air, 24V, 0-10V, (optional).
3(
sKOxZA
Additional customer-supplied contact OFF (Note: Remove jumper if component is present).
Only present/available for the following unit designs:
- All except “without coil” designs.
4)
sKOxZE
Additional customer-supplied contact ON
Only present/available for the following unit designs:
- All except “without coil” designs.
4!
sHSxRA
Hygrostat room (accessory)
Only present/available for the following unit designs:
- All except “without coil” designs.
4@ sHSxAB
Hygrostat extract air/duct (accessory)
Only present/available for the following unit designs:
- All except “without coil” designs.
4#
4$
4%
4^
sKOxBK
Fire damper, floating NC contact, (onsite), X= numbering (1, 2, 3, 4)
(Note: Insert jumper if component is not present).
Only present/available for the following unit designs:
- All except “without coil” designs, For more than 4 dampers, use the wiring diagram of the
fire protection dampers control panel.
4&
sKOxRM
Smoke detector, floating NC contact (onsite)
(Note: Insert jumper if component is not present).
Only present/available for the following unit designs:
- All except “without coil” designs.
T