15
InstallatIon and oPERatIon ManUal FoR sl2 solaR ModUlEs oF tHE GEnERatIon G2.1 and G2.2
danger! danger due to electric shock!
¼
insulate exposed cable ends.
¼
only connect cables with plugs.
4.1 saFety
danger!
danger due to electric shock!
When disconnecting an electric circuit transporting direct current,
electric arcs can occur that can result in life-threatening injuries.
¼
Do not disconnect the cable and plug while they are energized.
¼
Do not touch the poles at the same time.
Even at a low illuminance level, a solar module generates electric
current and electric voltage. Sparks and electric arcs can result
from the separation of a closed circuit. This can result in fatal
injury. The danger increases when several modules are connected
in series.
¼
Please note that the entire open circuit voltage can also be
on even with low level light irradiation.
¼
comply with the valid regulations and safety instructions for
the installation of electrical equipment and systems.
¼
undertake the necessary protection and precautionary mea-
sures. in the case of module or phase voltages of more than
120 v, this is outside the extra-low voltage.
¼
Work on the inverter and on the cables may only be carried
outbyaqualifiedelectrician.
4 electrIcal connectIon
danger! danger due to electric shock!
¼
never open the junction box.
¼
Do not remove the bypass diodes.
danger! danger due to electric shock!
¼
Don‘ttouchlivecontacts/contactareas