14
watch
,
taking into account the incorrect reading of hour of the completion of the work.
Switching on the type of heating
After setting the clock, oven can be started manually, holding for approx. 3 seconds
the sensor
ON/OFF
(pos. 1 Fig. No. 7), on the displays will appear highlighted symbol of oven
in the
section
”A”
. Then one should choose the type of the heating
by touching sensors
(arrows) and, using the description above, select
from shown symbols
suitable for given
dish the heating from the bottom, from the top or a combination thereof. At the moment, in
the
section
”
C”
will appear a flashing symbol
(50), with buttons (-) and (+)
we set the
needed temperature eg. 200°C; in order to switch on of oven, just touch the
start sensor
.
If we care about the
rapid heating up
of oven / switching on of all heaters/heater elements /,
when you select the type of heating, we touch the sensor
C
(pos. 9 Fig. No. 7), we set the
temperature by buttons (-) and (+) and we switch on the oven with start button.
Symbols in all sections of the panel are highlighted.
Note:
when you use the toaster function appears only number of
operating mode
1,2,3
which you can select with the buttons (-)(+)and switch on with start button. Operating modes
are set by the manufacturer and intended to slow or fast toasting. Mode 1. is approx. 175° C,
mode 3 approx. 250° C.
Achieving the heating temperature
Under digits of the digital display, displays a segment line, which shows the current
temperature in the interior of oven and mark symbolizing the work of the heating elements.
When light up all segments of line of LEDs and will disappear the luminous mark, it is a sign
of achievement by the interior of oven of the set temperature.
During work of oven, can
appear mark, which informs about heaters switched on.
Anytime is the ability to read the
instantaneous temperature
of the interior of oven
when you press the sensor
(info)
and changes of set temperatures. For this purpose, one
should touch the sensor
C
and, acting similarly as described above, change the settings.
Note:
sensor info does not work in the mode of toaster operation.
Switching off the oven is taking place
One should touch the button ON/OFF (pos.1 Fig. No. 7), we switch off the device,
sound is heard and are going out all displays in addition to the clock.
The oven performs the functions
Defrosting and cooling/chilling the foods, while switched on the internal fan.
Interior heating function with natural air circulation.
Function with forced air circulation and heating.
Function of the toaster or rotating grill.
Function of the toaster or grill with increased impact of heat from the top.
Function of
automatic work
programmed temporally works in
all programs
and
facilitates the process of use the oven, through the possibility of setting start and finish time
of the work and the temperature of interior.
Programming of heating for a limited time
One should select the layout of the heaters/heating type/ by touching the sensors
”
A”
, then adjust the temperature, depending on the type of food by touching the sensors
(-)
