16
The ceramic plate, grates and burner elements are wear elements
and wear out when the hob is used.
Warning!
If you notice cracks on the glass plate, immediately stop using the hob and call
customer support.
Cleaning guide at
www.solgaz.eu/czyszczenie
5.1. Regular cleaning.
For cleaning ceramics, we recommend products shown at www.solgaz.eu/srodki-
czystosci/ (however, it is forbidden to clean metal parts with such products, in particular the
black aluminium strip, in which the exhaust grilles are located). These products remove all
dirt from the ceramic plate, while being safe for it. If you notice any invasive effects when
other products are used, stop immediately.
We are not responsible for damages due to use
of chemicals other than those we recommend.
The hob can be cleaned only once it has cooled down to ambient temperature.
Use gently acting fluids to clean enamel surfaces (grates and all burner components).
Do not use strong abrasive cleaning agents, such as powders containing an abrasive,
abrasive pastes, abrasive stones, pumice, wire cleaners, etc.
Clean the hob regularly after each use. Do not allow the top to become dirty, in
particular avoid burns that happen during cooking.
▪
remove light, unburned
spots with a damp cloth without a cleaning agent.
▪
use a sharp scraper to remove tightly attached spots
. Then, wipe the surface with a
damp cloth and a special cleaning agent. Persistent stains cannot always be removed
during the first cleaning, even when a special cleaning agent is used.
It is best to let the cleaning agents dry and then wipe them off wet. Never apply cleaning
agents to hot elements of the hob. Any remaining cleaning agent should be wiped off with a
damp cloth before the hob is heated up again. Otherwise, they may have a corrosive effect
on varnished and metal elements of the hob.
Enamel grids are dishwasher safe.
5.2. Inspection and supervision over gas, electrical
and ventilation systems.
To ensure proper and safe operation of the purchased hob, check the condition of
the gas, electrical and ventilation systems, which should include:
-
checking the technical condition of the above-mentioned systems,
-
submitting comments to the building administrator in case of any doubts regarding their
technical condition.