14
programme on a given burner or by touching the booster function sensor (item 17) for the
selected burner.
4.4.6. Timer function
The programme allows
automatic shutdown
of the hob. The working time can be set
within a range
from 1 to 99 minutes.
The programmes work
on every
selected cooking zone and are independent of each
other.
When the timer is working, changes can be made to the hob's work mode.
Completion of the timer programme is signalled with a visual (the power level of the
turned off burner will start to flash) and audio signal.
Once switched off, the message
"H"
remains.
To take advantage of the function, touch the sensor of any working burner (items 10,
11, 12, 13, Fig. 6)and then the timer function sensor (item 16, Fig. 6).
Above the row of burner power displays (items 5, 6, 7, 8, Fig. 6) a function display will
appear (item 9, Fig. 6), which will show
"00"
. In 6 seconds, set a time in minutes using the +
and - sensors (items 14 and 15, Fig. 6) within a range from 1 to 99. After this time the burner
will be turned off. When the timer function is on, the burner display will be marked with a
blinking dot in the lower right corner of the display (items 5, 6, 7, 8).
You can see the time remaining in minutes until the the burner is turned off and
change this value at any moment. To check the remaining time/make a change, touch the
burner sensor with the active timer function (items 10, 11, 12, 13) and then the timer
function sensor (item 16). The timer display (item 9) will show the remaining time set until
the burner is turned off.
The function can be switched off by changing the work programme or turning off the given
burner.
You can also activate the timer function by setting the working time and then
the work programme when starting the hob.
4.4.7. Pause function
–
Stop'n go
The pause function can be used at any time during cooking. It allows you to stop the hob and
later return, with the previously set programmes and heating levels.
At least one burner of the hob must be working. When you touch the pause sensor
(item 19, Fig. 6) markings will light up in the indicator locations
and the operation of the
hob will be suspended for up to 15 minutes for all cooking zones. When the pause function is
on, it is only possible to use control panel lock sensors (item 4, Fig. 6)
and on/off sensors of the hob (item 3, Fig. 6)
The pause function is turned off by touching the function sensor (item 19, Fig. 6). At
that moment the indicators of previous settings will light up again and the hob will continue
to operate.
If the function is not switched off after 15 minutes from its activation, the hob will
turn off.