Manuel HM acoustic housing
19
Now mount the recirculation plate (No. 301).
Place twelve self-adhesive Velcro loops (No.
905) on the heat pump housing. Do this
around the fan opening and in the corners of
the heat pump housing. Remove the adhesive
from the Velcro loops and press the
recirculation plate against the housing.
At the top of the base frame are three jagged
profiles (NR. 701), which are pressed into the
return plate to keep it in place.
To do this, first tilt the knurled profiles in the
upper bar to the place of the three slots in the
bar. Then press the jagged profiles into the
sheet or cut the sheet with a Stanley knife.
The protruding parts of the prong profiles can
be bent by hand so that they no longer
protrude.
