Code:
ARAD-S2
Name:
Enclosure Security 2U for RACK19" cabinets 24 lines
v1.0
EN*
Edition: 1 from 21.07.2016
Supersedes the edition: ----------
1. Application:
The metal RACK-Security enclosure is designed for mounting the alarm control panel and the input/output modules in
free-
standing RACK19” cabinets with depths in the range from 800 to 1000mm. It consists of two elements:
1.
Patch Panel
is used to switch between the YTDY 6x0,5 cable with copper cores
and the elastic cable supplying signals and power to the control panel.
2.
Pull out enclosure with a 2U height
– alarm control panel and input and output modules are mounted in this
section - with a space for 7Ah battery, transformer, and the ARAW45 fan (transformer and fan are not included)
Both
ARAS800
and
ARAS1000
rails - selected depending on the depth of a RACK cabinet - constitute the load
bearing part of the enclosure (not included). The enclosure is fitted with 3 printed circuit boards (PCB) allowing connection
of signal, power and control cables. Each of the boards has 8 pairs of terminals designed to operate at a voltage of 30VDC
and a maximum current of 1,5A. In addition, each one is fitted with the 230VAC power board. The enclosure is fitted with 3
tamper switches.
1. Pulling out the enclosure from RACK profiles
2. Enclosure opening
3. Patch Panel opening
Universal holes in the enclosure allow mounting of control panels and expansion modules of the following companies:
DSC, PARADOX, RISCO, SATEL, PYRONIX, CROW, TELMOR, ROEL, ROGER, EBS and PULSAR.
Fig.1
