Manuel HM acoustic housing
12
Apply a strip of sealing tape (NR. 914) to the bottom of
the entire frame, which is glued in the middle of all four
floor frame profiles.
Put the frame on the floor. It is recommended that a
minimum distance of 200 mm be maintained between
the inside of the frame and the pressure side of the
heat pump and a minimum distance of 100 mm be
maintained between the suction side and the inside of
the frame. If there is enough space, it is advisable to
leave more space on the outlet side (ratio of 2/3). Air
outlet and 1/3 air inlet). A symmetrical distribution is
recommended in the width direction. This also
depends on the pipe connection.
