Page 13 of 24
Installation instructions – Wooden frame collectors
In-roof installation
(29)
In the same way, on the side, fix this cover section to
the collector.
(30)
As the bottom, place the straight pieces of the cover:
Start by inserting the new elements sideways into the
ones previously installed before completely fitting them
in.
(31)
Nail these pieces to the frame using sealed plumbing
nails, at the juncture.
(32)
On the right hand end, install the lower corner of the
frame following the same procedure as described in
(30).
page 14 - Installing the collectors
Technical changes may be made without notice
