Page 21 of 24
Installation instructions – Wooden frame collectors
In-roof installation
(53)
Insert the left hand cover strip and only fix it first with a
sealed plumbing screw on the side.
Then, drill the collector’s rail with a 4,5mm bit and
secure with a sealed plumbing screw.
(54)
Put the left hand side corner in place and secure it to
the collector.
This step will be repeated for the right hand side corner
at the suitable time.
CAUTION:
THOSE PIECES SHOULD BE FIRMLY INSERTED
INTO THE RUNNER. IF NEEDED, A WOODEN
BATTEN OR A HAMMER CAN BE USED.
(55)
Then, start inserted the straight extension pieces
sideways into the runner. They should first fit the
corners of the pieces previously installed and the be
completely and firmly inserted into the collector’s
runner.
(56)
The pieces should overlap each other by 25 to 50 mm.
25 – 50 mm
MULTIPLE ROW INSTALLATION
:
To
cover and protect horizontal junctures between rows,
covering pieces are provided. They should be inserted into the upper collectors’ runner.
page 20 - Installing the collectors
Technical changes may be made without notice
