3
AIR901F/906F/907F employs overload protection (fuse). A blown fuse indicates an overload or short
-
circuit situa-
tion. If the fuse blows, unplug the product from the outlet. Replace the fuse per the instructions below and check the
product. If the replacement fuse blows, a short
-
circuit may be present and the product should be discarded or returned
to an authorized service facility for examination and/or repair.
HOW TO REPLACE THE FUSE
1. Unplug the fan from the outlet. Place the plug on a firm, flat surface.
Open the fuse cover, located on the top of the plug, using your thumb or a flathead
screwdriver to slide the over towards the prongs.
NOTE: Ensure that the fuse cover is completely open before attempting to remove the
fuse.
2. Remove the fuse carefully by using a small screwdriver to pry the fuse out of the
compartment by the metal ends of the fuse.
3. Risk of fire. Insert a new 2.5 Amp, 125 Volt fuse into the fuse compartment, making
sure that the fuse is securely in place.
4. Slide the fuse cover closed completely. If the fuse cover is difficult to close, make
sure the fuse is properly secured in place by pressing down on the metal ends of the
fuse.
CAUTION
: Risk of fire. Do not replace the attachment plug. It contains a safety device
(fuse) that should not be removed. Do not use the product if the attachment plug is dam-
aged.
To avoid a risk of fire, only replace with a 2.5 Amp, 125 Volt fuse.
To order a new fuse, contact SoleusAir at: (877)
-
976
-
5387
ELECTRIC SAFETY
