background image

Precaution

8

Operation

CAUTION

Upon completion of any service or
repairs to this the TV, ask the service
technician to perform safety checks to
determine that the TV is in a safe 
operating condition. 

Do not place anything containing
liquid on top of the TV.

- This may cause a fire or could give 

an electric shock.

Never add any attachments and/or
equipment without approval of the
manufacturer. Such additions can
increase the risk of fire, electric 
shock, or other personal injury.

NO!!

NO!!

Operation

WARNING

When replacement parts are required,
be sure the service technician uses
replacement parts specified by the
manufacturer or those that have the
same characteristics as the original
part. Unauthorized substitutions may
result in additional damage to the unit. 

If you make adjustments yourself, 
adjust only those controls that are 
covered by the operating instructions.
Adjusting other controls may result 
in damage and will often require 
extensive work by a qualified 
technician to restore the TV to normal.

Do not let children hang on or
ride on the TV.

In case of smoke or strange smell from the 
TV, switch it off, unplug it from the wall outlet
and contact your dealer or service center.

- This may cause a fire or could give an electric shock.

Do not insert anything through the openings
in the unit, where they can touch dangerous
voltage points or damage parts. Never spill
liquid of any kind on the TV.

NO!!

Summary of Contents for SPTV42AS1D






































































Reviews: