SOLE EUROSTAR ECO 125-1-S150, Installation & User Manual

Page: 7 / 27

6
2.5. Thermo convention liquid
The thermal energy collected from the solar irradiation by the collector is transferred to the heat – exchanger
of the tank by the thermo convention liquid, which is naturally re circulated by the thermosiphonic principle in
the closed loop system. The heat exchanger is heating the domestic consumption water. The solution
contains inhibitors for antirust protection and propylenoglycol for antifreeze protection up to -15
o
C. If lower
temperature protection is needed please consult your supplier.
The solution is a non toxic, non-flammable chemical liquid; however normal protection measures should be
taken during handling. Keep it away from children.
Eyes protection: Protective glasses must be used.
Skin protection: PVC or rubber gloves must be used.

In case of contact with eyes, wash eyes with plenty of water for 15 minutes (with open eyelids)

In case of contact with skin simply wash with water and soap.
Physical Properties:
Phase: liquid
Color: Light red
Odor: nearly odorless
Specific gravity at 20
o
C : 1,03g/cm
3
Freezing point: -15
o
C
Boiling point: 106
o
C
Packing: Containers of 2ltr. & 4ltr. ready for usage.
2.6. Packaging, Transport and Storage
The solar collectors and the solar tanks are supplied individually packaged, the collectors in carton boxes
and the tanks with stretch film and expanding polystyrene. The collector model is indicated on the outside of
each box and the tank model is indicated outside of each package. Depending on the number of units
ordered, collectors can be supplied palletised in groups of up to 12 units. Collectors should always be during
transport and storage placed in horizontal position with the glass facing on top, otherwise there is danger of
water entering in the collectors from the ventilation holes at the back of the collector. They should not be
stored or transported in piles of more than 12 units. The tanks can be supplied palletised in groups of up to
10 units. Alternatively, under request, the whole system can be palletised in individual pallets. The tanks
should be always in vertical position during transportation and should not be stored or transported in piles of
more than 2 units. It is recommended to use special safety belts during transportation in order to avoid
movements and/or falling
. The support system, the hydraulic accessories and the thermo-convention liquid
are delivered in one pallet, the exact content and models are indicated on the outside of each pallet.
2.7. Placement of the System
The choice of location, inclination and orientation of the solar system has to be determined at the design
stage of the installation. The installation of the solar system in the building should be carried out respecting
the instructions of the person in charge of the project, who should have taken into consideration the effect of
the orientation, inclination and possible shadows in the calculation of benefits of the solar system.
Particular attention should be paid to the minimum distance maintained between a wall or obstacle in front of
a system and it. During the calculation of this distance one should take into consideration the latitude of the
place, the inclination of the terrain and the period of use of the facility. Failure to have a more detailed
specification by the designer of the facility, the distance should not be less than the indicated below.