SOLE EUROSTAR ECO 125-1-S150, Installation & User Manual

Page: 3 / 27

2
1. Observance of the instructions and standards.
1.1. It is very important to follow these installation, operating and maintenance instructions , in order to avoid
danger of death, injury, property damages, and to have your device functioning properly in the long run. The company
that manufactured and/or supplied this solar system has no liability for the installer and/or the user in case these
instructions have not been followed carefully.
1.2. Whether further information or clarifications are needed, please contact the supplier of the product.
1.3. These solar systems have been manufactured and tested under the European standards:
ISO 9806:2013: Energy – Solar Thermal Collectors – Test methods
EN 12975-1: Thermal solar systems and components – Solar collectors -part 1: General requirements.
EN 12975-2: Thermal solar systems and components – Solar collectors – part 2 : Test methods.
EN 12976-1: Thermal solar systems and components – Factory made systems - part 1: General
requirements.
EN 12976-2: Thermal solar systems and components – Factory made systems – part 2: Test methods.
1.4. These systems are in conformity with the applicable requirements of the following documents:
Ref. No. Title
EN 60335-1:2012 +A11:2014
(IEC 60335-1:2010) Household and similar electrical appliances — Safety —
Part 1: General requirement
EN 60335-2-21:2003 +A2:2008
(IEC 60335-2-21:2002 +A2:2008) Household and similar electrical appliances — Safety —
Part 2-21: Particular requirements for storage water heaters
EN 60529:1991 +Α1:2000 +Α2:2013
(IEC 60529:1989 +Α1:1999 +Α2:2013) Degrees of protection provided by enclosures (IP code)
ENV 61024-1:1995
(
IEC 61024-1:1990)
Protection of structures against lightning
Part 1: General principles
The manufacturer declares that the equipment named in this document have been designed to comply with the
relevant sections of the above referenced specifications.
2. Description of solar system and components
2.1 General Description
This solar system is a closed loop thermosiphon unit which delivers hot water for domestic use. It consists
from the collector, the accumulation tank, the support system, the hydraulic accessories and the thermo-
convention liquid.
Four nominal sizes of accumulation tanks are combined with four different sizes of collectors as the table
below:
MODEL TANK NOMINAL SIZES
COLLECTOR NOMINAL
SIZES
125 ltrs 150 ltrs 200 ltrs 300 ltrs 1,50m
2
2,00m
2
2,30m
2
2,60m
2
125-1-150
1 1
125-1-200 1 1
150-1-200 1 1
150-1-230 1 1
150-2-150 1 2
200-1-200 1 1
200-1-230 1 1
200-1-260 1 1
200-2-200
1 2
300-2-200 1 2
300-2-230 1 2
Other combinations are available upon request