15
B74/R72
FITNESS
BIKE
4
CONSOLE
MAST
HARDWARE
STEP 4
#124
. 5/16” x 3/4”
Socket Head Cap Bolt
(4 pcs)
#104
. Ø8 x 1.5T
Split Washer (6 pcs)
#87
. 5/16” x 12 x 1.0 T
Flat Washer (6pcs)
#89
. M5 x 12L
Phillips Head Screw
(4 pcs)
#123
. 5/16” x 18 x 5/8”
Button Head Socket Bolt
(2 pcs)
#88
. 4 x 12L
Sheet Metal Screw
(3 pcs)
※
Screws 87, 89, 104,
123, 124 are already
on the mainframe
1. Pull Upper Handpulse Wire (
74
) and Computer Cable (
73
) through the Console
Mast (
2
) and use Allen wrench (
142
) to secure with four Socket Head Cap Bolts
(
124
), Split Washers (
104
) and Flat Washers (
87
) each.
2. Cover with both left and right Console Mast Covers (
27, 28
) and use Phillips
Head Screw Driver (
140
) to secure with three Sheet Metal Screws(
88
).
3. Connect Upper Handpulse Wire (
74
) and Computer Cable (
73
) with the Con-
sole (
71
) and use Phillips Head Screw Driver (
140
) to secure Console Mast (
2
)
with four Phillips Head Screws (
89
).
4. Use M5 Allen Wrench (
140
) tighten Mast Handle bar Assembly (
9
) and Console
Mast (
2
) together with two Button Head Socket Bolts (
123
), Split Washers (
104
)
and Flat Washers (
87
) each.
Be very careful during this step to make sure the cables do not become
pinched between the parts. This could cause the wires to short causing
damage to the electronics.
