background image

Dyaco

 

Canada

 

Inc.

 

2013

 

22

RATE OF PERCEIVED EXERTION

 

Heart rate is important but listening to your body also has a lot of advantages. There are 
more variables involved in how hard you should workout than just heart rate. Your stress 
level, physical health, emotional health, temperature, humidity, the time of day, the last 
time you ate and what you ate, all contribute to the intensity at which you should workout. 
If you listen to your body, it will tell you all of these things. 

 

The rate of perceived exertion (RPE), also know as the Borg scale, was developed by 
Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20 
depending upon how you feel or the perception of your effort. 

 

 

The scale is as follows: 

 

 

Rating Perception of Effort 

 

 

6 Minimal 
7 Very,very light 
8 Very,very light + 
9 Very light 
10 Very light + 
11 Fairly light 
12 Comfortable 
13 Somewhat hard 
14 Somewhat hard + 
15 Hard 
16 Hard + 
17 Very hard 
18 Very hard + 
19 Very,very hard 
20 Maximal 

 

You can get an approximate heart rate level for each rating by simply adding a zero to 
each rating. For example a rating of 12 will result in an approximate heart rate of 120 
beats per minute. Your RPE will vary depending up the factors discussed earlier. That is 
the major benefit of this type of training. If your body is strong and rested, you will feel 
strong and your pace will feel easier. When your body is in this condition, you are able to 
train harder and the RPE will support this. If you are feeling tired and sluggish, it is 
because your body needs a break. In this condition, your pace will feel harder. Again, 
this will show up in your RPE and you will train at the proper level for that day. 

 

 

 

 

 

 

Summary of Contents for 16810385






































Reviews: