Step 2
Tighten the rear panel with the support using M12 bolt to a torque of 42 N m (as shown
.
in Figure 4 10)
.
.
Figure 4 10 Tightening the rear panel with the support
.
Step 3
Mount the inverter on the support and tighten the inverter with rear panel using screws
,
as shown in Figure 4 11
. .
Figure 4 11 Tightening the inverter
.
Anti-theft lock is
recommended to
be installed here
Figure 4 9 The rear panel unit mm
.
(
:
)
Step 1
Move out the rear panel from the packing case and determine the positions for the
,
inverter and the support shown as in Figure 4 9
,
. .
4 5 Support-mounting the Inverter
.
14
18
