9
Installation Steps
2.5 Step 5 Install LightTracker flex
Place the dome upside down on a soft clean surface. Fit the LightTracker flex (this is the
mirrored insert) with the reflective side facing inwards. Align the holes in the LightTracker
over the corresponding tabs inside the dome and slide the LightTracker flex downwards to
secure it in place.
Note:
If the sunlight from the south is blocked, do not mount the LightTracker flex in the
dome!
2.6 Step 6 Install RayBenders flex
Fit the two RayBenders flex inserts (these are the transparent ribbed insert) onto the
remaining tabs inside the dome with the smooth sides facing inwards and the ribbed sides
against the dome. Align the holes in the RayBenders with the corresponding tabs inside the
dome and slide the RayBenders downwards to secure them in place.
