Solas THIRTY8 BI-38N-C, Installation & Operation Manual

Page: 6 / 51

5
IMPORTANT SAFETY INFORMATION
Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a professional service person. More frequent
cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is
imperative that the control compartments, burners and circulating air passageways of the
appliance be kept clean.
WARNING: Do not operate the appliance with the glass door assembly removed, or if the glass is
cracked or broken. Replacement of the glass should be done by a qualified service person.
WARNING: Use only glass assembly, P/N 12357 which includes the glass panel, frame and gasket. Do
not use substitute materials. Do not strike or slam the glass front. Do not use abrasive cleaners. Do
not clean when hot.
CAUTION: DO NOT OPERATE WITH BROKEN GLASS
Installation and repair should be done by a qualified service person. The appliance should be inspected
before use and at least annually by a professional service person. More frequent cleaning may be
required due to excessive lint from carpeting, bedding material, etc. It is imperative that the control
compartment, burners and circulating air passageways of the appliance be kept clean.
Note:
Periodically conduct a visual check to ensure the pilot and burner flames are as shown.
Vent Installation Note:
When the first piece of Directvent pipe
is attached to the starter collar of the
fireplace, be sure to inspect both the
inside and outside joints to ensure a
secure fit with no air gaps. Once it is
confirmed there are no gaps, rotate
the pipe clockwise to lock it in place.
Follow the vent manufacture’s
installation instructions during vent
pipe installation.