Solas FIN-36N, Installation & Operation Manual

Page: 18 / 34

18
ASSEMBLY & INSTALLATION
Installing Convection Air Ducts:
With the front glass panel fitted, you now need to install the two
convection air ducts tat were shipped in the accessory box with
the fireplace insert.
Align the top of the duct with the air channel on the top of the
insert.
Insert the “keyed” tabs into the slots provided on the insert front
frame, and seat in place.
Both Convection air ducts need to be in position be-
fore the Fireplace surround can be installed
Installing Front Face Surround:

Locate the On/Off switch connecting cable on the back side of the Front
Face.

Locate the connection point for the switch cable on the front of the fire-
place insert. Plug the cable into the connection point on the unit

Engage the hanging hooks on the back side of the front face surround on
the hangers located on the top left and right side and bottom left and
right side of the insert.
On/Off Switch plug in
location.
Note: The Fireplace insert surround shall not seal ventilation openings in the fireplace.