5.0 Setting up the SI7500 (cont.)
502858 issue 1.1
5.0 Setting up the SI7500 (cont.)
33
5.11 Backing Up
The SI7500 features the capacity to Save & Load configurations (Settings and Parts) using a USB flash memory stick.
It is recommended that after satisfactory configuration of the SI7500, a backup copy of the settings be taken. This
can be done by saving the SI7500 settings as a file onto a USB flash memory stick. The settings can later be copied
onto the same or another SI7500 to refresh a configuration or to speed the installation procedure in applications using
several units.
1. With a USB flash memory stick connected to the SI7500, and having already entered the Supervisor password...
2. Re-enter the Supervisor screen in the Setup menu.
3. Select the Supervisor password field and press the softkey below the “Load..” or “Save..” option.
4. Select the desired data type to save or load by pressing the softkey below the displayed options.
5. Follow the on-screen prompts to finalise the data transfer.
