5.0 Setting up the SI7500 (cont.)
502858 issue 1.1
5.0 Setting up the SI7500 (cont.)
23
5.8.3 Nominal With -- Tolerances
A nominal value is displayed with tolerances entirely on
the minus side of nominal.
To specify a range of tolerances below the nom inal value
(- Tolerance):
1. Press the +/- softkey.
2. Enter the low end of the negative tolerance range into the - Max, - Limit and
-Warn fields, and then enter the Nomi nal value.
3. Enter the high end of the negative tolerance range into the + Warn, and press
the ++ /-- soft-key to change the field to - Warn.
Re peat this procedure for the + Limit and + Max fields. This establishes the
upper end of the negative range of acceptable tolerances.
