5.0 Setting up the SI7500 (cont.)
502858 issue 1.1
5.0 Setting up the SI7500 (cont.)
31
Parity:
The Parity field is used to specify odd or even parity for error checking, or to omit parity error checking. Use the None, Odd or Even softkeys to specify
parity error checking parameters.
Handshaking:
The Handshake field shows the type of syn chronous signaling used by the system to prevent data collisions on the serial port. This is set to
hardware and cannot be changed.
End of character (EOC) delay:
The EOC delay field is used to specify the delay inserted after each character is transmitted. This de lay can be increased or
decreased to accom modate various serial devices. Use the numeric keypad to specify delays (in milliseconds) from 0 to 10 seconds between characters.
Specifying end of line (EOL) delay:
The EOL delay field is used to specify the de lay inserted after each line is transmitted. This delay can be in creased or
decreased to accommodate vari ous serial devices. Use the numeric keypad to specify delays (in milliseconds) from 0 to 10 seconds between lines.
Serial port data type:
Data can be sent to the serial port as a report formatted in the Re port Setup screen, or as record data format ted in the Send Setup
screen, or as both.
The serial port can also be disabled for data transmission by selecting the None softkey.
