SolarMax 10ES-T, Instruction Manual

Page: 85 / 96

85
en
ALARM TYPE SOLUTION
E029 Circuit breaker
tripped.
■
Check the correct positioning of the inverter and that the
installation complies with the provisions contained in this
manual in the “Positioning” and “Mounting” sections.
■
Check that the ambient temperature is within the allowed
range.
■
Check the correct operation of the cooling fans.
■
Check that there is no accumulation of dust near the venti-
lation openings.
■
If the problem persists, contact the technical support
service.
E030 Overload protection
■
Check the sizing and the output connections to the system.
■
Reduce the domestic load connected to the inverter.
■
Refer to the section “Electrical connections”.
■
If the problem persists, contact the technical assistance
service.
E031 Wrong AC connection.
■
Check the sizing and the output connections to the system.
■
Refer to the section “Electrical connections”.
■
If the problem persists, contact the technical assistance
service.
E032 Converter control
system fault.
■
Switch off and restart the system.
■
Refer to the sections “System switching off” and “System
switching on”
■
Should the problem persist, contact our technical support
service.
E033 Converter control
system fault.
■
Switch off and restart the system.
■
Refer to the sections “System switching off” and “System
switching on”
■
Should the problem persist, contact our technical support
service.
E034 Converter control
system fault.
■
Switch off and restart the system.
■
Refer to the sections “System switching off” and “System
switching on”
■
Should the problem persist, contact our technical support
service.
E035 Converter control
system fault.
■
Switch off and restart the system.
■
Refer to the sections “System switching off” and “System
switching on”
■
Should the problem persist, contact our technical support
service.