background image

12

Safety, Installation, and Operations Manual

© Solaria Corporation All rights reserved. Contents subject to change without notice.    SOL-MAN-0002 Rev 09,12-2020 

Power Unlocked by Design

5.0 Maintenance

Solaria modules are virtually maintenance free. Following simple maintenance steps will ensure reliable production 

of DC electric power for the expected life of the product.

 

y

Inspect electrical and mechanical connections for safety and corrosion once every year.

 

y

Under most weather conditions, normal rainfall is sufficient to keep the module glass surface clean.

 

Š

Modules that are mounted at a small tilt angle will not self-clean as easily as modules that are mounted at 

large tilt angles. If dirt build-up becomes excessive, clean glass surface with water and soft cloth. Do not 

use harsh cleaning materials.

 

y

Cleaning the back surface of the module is not necessary for proper operation.

6.0 Disclaimer of Liability

 

y

Since the use of this Safety, Installation and Operation Manual and the conditions or methods of installation, 

operation, use and maintenance of the module are beyond The Solaria Corporation control, The Solaria 

Corporation does not assume responsibility and expressly disclaims liability for loss, damage, injury or expense 

arising out of or in any connection with such installation, operation, use or maintenance of the module.

 

y

The Solaria Corporation assumes no responsibility for any infringement of patents or other rights of third 

parties that may result from the use of the module. No license is granted by implication or otherwise under any 

patent or patent rights.

 

y

The information in this Manual is based on The Solaria Corporation knowledge and experience and is believed 

to be reliable; but such information, including the product specifications (without limitations) and suggestions, 

do not constitute a warranty, expressed or implied. The Solaria Corporation reserves the right to make changes 

to the product specifications or this manual without prior notice.

 

y

This document may be provided in multiple languages. If there is a conflict among versions, the English 

language version dominates.

7.0 Electrical Specifications

 

y

Please refer to the module datasheet for electrical specifications. Rated electrical characteristics are within 

10% of STC values. The datasheet is available at www.solaria.com.

Summary of Contents for PowerXT R-BD Series

















Reviews: