SOLARFOCUS Pelletel Egance 10, Operation Manual

Page: 35 / 48

13 Weatherman function
► Open the 2 turnbuckles 1 and remove the lid 2
upwards.
► Empty the ash container.
DANGER - risk of fire due to hot ash self-igni-
ting. Only store removed ash in metal con-
tainers with a lid.
►
After replacing the emptied ash container, lock
the bar again by pulling it forwards.
► Confirm the information message on the display
with OK
1 > Abb. 2-54
►
Press the Ash container emptied 2 button (in the
selection menu , ash container button).
Abb. 2-55
Ä
The counter for the ash container fill level is
reset to zero.
Note: Press button 3 to open the Boiler cleaning sta-
tistics screen (shows the time of the last 5 boiler clea-
ning operations).
14.1.2 Boiler cleaning - manual activities
Two ways to start with the boiler cleaning:
The burner is active
► Switch the boiler off (press the STOP button >
13 ) and leave to cool.
The boiler is in standby status
►
Press the STOP button > 13 , and if necessary let
the boiler cool down.
► Press the boiler cleaning button > Abb. 2-55
► Carry out the following activities:
–
Check the stainless steel combustion grate for
wear
> 35
–
Check the stainless steel combustion grate
support
> 36
– Check the combustion chamber for ash > 36
14.1.2.1 Check the stainless steel combustion
grate for wear
In the event of advanced wear of the stainless steel
combustion grate, the spaces in the grate enlarge. A
seriously worn stainless steel combustion grate will
allow incompletely burned pellets to fall through.
Check this regularly when emptying the ash con-
tainer; if necessary, replace the stainless steel com-
bustion grate
> 36
Operation manual pelletelegance 35