5 Use and operation
Write e-mail
3
Used to manually send emails. The recipient’s
address can be selected from the address book using
To
and
CC
or manually entered in the recipient line.
Alarm test
4
Used to test the email settings. Pressing the button
sends an email to the recipient
status email.
Send alarm email
5
Activates/deactivates the automatic sending of alarm
emails. The sending of status emails is not affected
by this.
Alarm configuration
6
Settings for the alarm emails to be sent automatically.
Abb. 2-23
Alarm subject
: is used for all alarm emails and status
emails, therefore it should be as meaningful as pos-
sible (e.g. boiler type / name of system operator; 40
characters available).
Alarm groups
: For prioritisation of the alarm mes-
sages (e.g.
Alarm group 1
receives all messages,
Alarm group 2
receives only operationally-relevant
messages, such as information on faults).
Status email
: Set the time at which the status email is
sent. The automatically generated content of the sta-
tus email is:
–
Current status of the heating system
–
Fault present, and which
Alarm selection
: This is where you define which alarm
group is notified of which event.
5.4.6.4 mySOLARFOCUS app
Pressing the button displays the screen with infor-
mation relating to online registration for the
mySOLARFOCUS app
(serial number, PIN, status,
etc.)
Detailed information about using the
mySOLARFOCUS app
5.4.6.5 Language selection
Abb. 2-24
5.4.6.6 Date and time
Abb. 2-25
Switchover from summer/winter time takes place
automatically when the
Switchover Summer-Winter
1
parameter has the value
Europe
. Switchover takes
place on the last Sunday of the months of March and
October. If
America
is set, the clock is changed to
summer time on the first Sunday in April.
Operation manual
pelletelegance
19
