5. Pull out the AC Plug cable from the conduit entry. See
Directly Connecting the AC Grid to the Smart EV
Charger
To directly connect the AC grid to the Smart EV Charger:
1. Strip 15/32'' (12mm) of the 14-6 AWG AC wire insulation.
2. Connect the conduit ground with a 14-6 AWG wire to the GND (see the figure in
step 5).
3. Insert the AC conduit into the AC conduit entry.
NOTE
Connect the equipment grounding before connecting the AC wires to the AC
terminal block.
Veillez à relier le conducteur de PE (la terre) avant de connecter les fils CA au
bornier CA.
4. Insert the AC cable through the conduit entry and tighten the screws (see the figure
in step 5).
5. Insert the wires into the round openings according to the labels on the terminal
blocks (G, L2 and L1) and close the levers – the wires are automatically clamped (see
the following figure).
Smart EV Charger Installation MAN-01-00657-1.0
27
Directly Connecting the AC Grid to the Smart EV Charger