CAUTION!
Installing a SolarEdge system without ensuring compatibility of the panel
connectors with the optimiser connectors may be unsafe and could cause
functionality problems such as ground faults, resulting in inverter shut down. To
ensure mechanical compatibility of the power optimisers’ connectors with the PV
panel’ connectors to which they are connected:
Use identical connectors from the same manufacturer and of the same type
on both the power optimisers and on the panels; or
Verify that the connectors are compatible in the following way:
The panel connector manufacturer should explicitly verify compatibility
with the SolarEdge optimiser connector; and
A third-party test report by one of the listed external labs (TUV, VDE,
Bureau Veritas UL, CSA, InterTek) should be obtained, verifying the
compatibility of the connectors.
For more information, refer to
https://www.solaredge.com/sites/default/files/optimizer-input-
IMPORTANT SAFETY FEATURE
Panel with SolarEdge poweroptimisers are safe. They carry only a low safety
voltage before the inverter is turned ON. As long as the power optimisers are
not connected to the inverter or the inverter is turned OFF, each power
optimiser will output a safe voltage of 1V.
Package Contents
Power optimisers
Stainless steel grounding lock washers
Installation Guidelines
The minimum and maximum string length guidelines are stated in the power
optimiser datasheets. Refer to the Designer for string length verification. The
Designer is available on the SolarEdge website at
https://www.solaredge.com/products/installer-tools/designer#/
.
EV Charging Single Phase Inverter MAN-01-00629-1.2
17
Package Contents
