SAVE A SERVICE CALL
21
Red and Yellow LEDs recommence to standard flash
If the red and yellow LEDs recommence to standard flash:
Count the number of red flashes and the number of yellow flashes.
There will be a three (3) second pause, then the sequence of flashes will repeat.
The number of red and yellow flashes determines the fault code.
E.g. 3 x red flashes and 4 x yellow flashes is a fault code 34.
Note the fault code and phone your nearest Solahart Dealer to arrange for an inspection.
Yellow LED recommences a solid glow (constant illumination)
If the yellow LED recommences a solid glow, press the Push Button three (3) times in quick succession.
The red, yellow and green LEDs will fast flash once simultaneously (Fault Display Sequence mode).
The red and yellow LEDs will then commence to standard flash. This represents a fault code.
Count the number of red flashes and the number of yellow flashes.
The number of red and yellow flashes determines the fault code.
E.g. 2 x red flashes and 3 x yellow flashes is a fault code 23.
Note the fault code.
Note:
Up to five fault codes may be displayed. If there is more than one fault code, this sequence will
repeat except the red, yellow and green LEDs will simultaneously fast flash two (2), three (3), four (4)
or five(5) times (Fault Display Sequence mode) before displaying the second, third, fourth or fifth fault
code respectively, with a three (3) second delay between each sequence of flashes.
Note any additional fault code(s).
Three seconds after the last fault code has been displayed, the yellow LED will recommence a solid
glow.
The above procedure can be repeated by pressing the Push Button again three (3) times in quick
succession, if it is necessary to recount and note the red and yellow fault code flashes.
After the fault codes have been noted, phone your nearest Solahart Dealer to arrange for an
inspection.
Blue LED recommences to blink flash
If the blue LED recommences to blink flash after thirty (30) minutes, phone your nearest Solahart Dealer to
arrange for an inspection.
