INSTALLATION - PV MODULES
41
7. Place an end clamp into the end of
each rail. Ensure that the end clamps
are tight against the module and are at
least 25 mm from the rail ends. In
positions where earthing plates are
required, ensure the frame of module
is located on top of the protrusions of
the earthing plate. Tighten end clamp
bolts to 21 Nm.
8. Repeat the steps 3 - 7 for each row of
modules.
Mid clamps may be temporarily placed
between rows to ensure 18 mm
uniform spacing between rows.
Module installation is now complete.
