9
EN
before switch it on again.
•
When not in use store as ex-
plained in “When not in use,
store as follows”.
•
Do not insert pins.
•
Do not crease the appliance by
placing items on top of it during
storage.
•
Do not use if wet.
•
Remove the control before
washing. The control must never
be submerged in water.
•
If the connection to the mains
has been damaged, it must be
replaced, take the appliance to
an authorised technical support
service. Do not attempt to disas-
semble or repair the appliance
by yourself in order to avoid a
hazard.
•
Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
•
Connect the appliance to a socket that can
supply a minimum of 10 amperes.
•
socket properly. Do not alter the plug. Do not
use plug adaptors.
•
Do not force the power cord. Never use the
power cord to lift up, carry or unplug the ap-
pliance.
•
Do not allow the power cord to hang or to come
into contact with the hot surfaces of the appli-
ance.
•
Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
•
Do not touch the plug with wet hands.
•
Do not use the appliance if the cable or plug
is damaged.
•
If any of the appliance casings breaks, immedi-
ately disconnect the appliance from the mains
to prevent the possibility of an electric shock.
•
Do not use the appliance if it has fallen on the
it has a leak.
•
Do not use the appliance in association with a
programmer, timer or other device that auto-
matically switches it on.
•
Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the ap-
pliance, this will increase the risk of electric
shock.
•
Fully unroll the appliance’s power cable before
each use.
•
Do not use the appliance if the on/off switch
does not work.
•
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
•
Store this appliance out of reach of children
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
•
Make sure that the control is not covered dur-
ing the use.
•
Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer’s liability null and void.
DESCRIPTION
1. Pad
2. Cover *
3. Power cord
4. Power cord connector
5. Pad connector
6. Control
7. Temperature control switch
8. Pilot light
* For models CT8636 & CT8642
INSTRUCTIONS FOR USE
•
Make sure that all products’ packaging has
been removed.
•
Spread the pad out fully, making sure it’s not
folded or creased.
•
Unroll the cable completely before plugging it
in.
