SOLAC CT8607, Instructions For Use Manual

Page: 8 / 39

ENGLISH EN
DESCRIPTION
1. Product
2. Fabric
3. Power cord
4. Power cord connector
5. Product connector
6. Control knob
a. ON/OFF button
b. Temperature control button
c. Time setting button
d. Temperature setting display screen
USE AND CARE:
•
Fully unroll the appliance’s power cable before
each use.
•
Do not use the appliance if the ON/OFF switch
does not work.
•
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
•
Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with
its use
•
Never leave the appliance connected and una -
ttended if not in use. This also saves energy
and prolongs the life of the appliance.
USE
BEFORE USE:
•
Make sure that all the product’s packaging ma -
terial has been removed.
USE:
•
This appliance has been designed exclusively
for heating specific areas of the body. Do not
use it for any other purpose.
FITTING THE PRODUCT
•
Connect the power cord connector (4) to the
product connector (5) (fig. 1). Make sure it is
securely connected.
•
Plug the power cord (3) into the mains.
•
The display screen (d) will light up for a mo-
ment, displaying an ‘8’ on the screen and then
disappear, leaving a dot on the screen. You
can now select the desired time and tempera -
ture settings. (fig.2).
SELECTING THE TEMPERATURE
•
Press the ON/OFF button (a).
•
The display screen will light up (d) and show
temperature position 1.
•
If the letter E flashes on the display, please
refer to the “Troubleshooting” section” (fig. 3).
•
There are 10 temperature settings, from 1 to
10. Positions 1 to 9 will be displayed as the
numbers 1 to 9, whereas position 10, being the
highest setting, , is displayed as ‘H’.
•
These temperatures are approximate and may
vary slightly while the appliance is in use.
•
If you would like to increase the temperature,
press the temperature position button (b) until
the desired temperature position appears on
the display screen (d) (fig. 4).
•
If the product becomes too hot for your liking,
press the temperature control button again (b).
It will once again return to the start position.
CHOOSING THE TIME SETTING
•
There are 9 time settings, from 1 to 9 hours.
You can select the time using button (c).
•
Once the selected time has elapsed, the
appliance will switch off automatically.
SWITCHING OFF AND UNPLUGGING
•
Press the ON/OFF button (a).
•
Disconnect the power cord from the product
connector.
•
Unplug the power cord from the mains supply
(3).
•
Allow the product to cool down before storing
or cleaning it.
TROUBLESHOOTING
•
If the letter E appears on the display screen,
proceed as follows:
•
Check that the power cord connector (4) is co-
rrectly inserted into the product connector (5).
If not, press the ON/OFF button (a) and insert
it correctly.
•
Check that the operation error is not caused
by overheating. To do so, press the ON/OFF
button (a) and allow the product to cool. Find
out what is causing the product to overheat and re -
move the cause.
•
Do not cover this product with plastic bags or
any additional covers.
•
If the appliance stops working, contact an au -
thorised technical service.