23
6. SETTINGS FOR THE SRX/NET
2. Select "Slave" as the SRX/NET mode and press
[OK]
. Selection can also be made by tapping the
icon in the status panel until a menu
appears.
$
• When communicating between a data
collector and the RC controller using
Bluetooth
wireless technology, set COM 2 of
the RC controller as the "Slave" device. Set
the data collector as the "Master" device.
C
"8.3 Communication Status
&
Bluetooth
connections"
3. The display returns to Meas mode and SRX/NET
enters "Waiting" mode. Check that the RC
controller
Bluetooth
mode is set to "Master" and
power ON to initiate a connection.
C
"9.3 Communication Setup for the RC
Controller"
4. When a connection has been successfully
established
is displayed in the status bar.
•
●
COM1
on the RC controller control panel is lit.
$
• Press
[Info]
in the
Bluetooth
tab to display the
Bluetooth
device address.
