22
6. SETTINGS FOR THE SRX/NET
The following settings are necessary in order to use the SRX/NET as part of the On-demand Remote
Control System.
C
For other functions and operations, see the Operator's Manual (Series SRX/NET05/NET1)
For further details regarding
Bluetooth
communications, see "2. PRECAUTIONS Precautions
concerning Bluetooth wireless technology"
G
• RC Handle with
Bluetooth
(RC-TS3) is necessary for
Bluetooth
communication.
•
Bluetooth
communication causes SRX/NET battery power to be depleted at a rate higher than that
for normal operation.
When communicating between the SRX/NET and RC controller using
Bluetooth
wireless technology,
COM 1 of the RC controller will be set as the "Master" device and the SRX/NET will be set as the
"Slave" device.
1. Select "Comms" in SETTINGS mode. Set
"Comms mode" in the Comms setup tab to
"
Bluetooth
".
Check that the status panel icon has changed to
.
G
• Changing communication settings during
Bluetooth
communication will cancel the
connection.
• The
status bar icon cannot be tapped in
<Communication Setup>.
6.1
Settings for
Bluetooth
Communication
