69
16. SETTING-OUT LINE
2. Set the following items.
(1) Incr:
Increment by which line length and offset can be
decreased/increased using the arrow softkeys.
(2) Line:
Distance along the baseline from the first point to
the position at which a line extending from the
required point intersects the baseline at right
angles (X direction).
(3) Offset: Distance from the required point to the position
at which a line extending from the required point
intersects the baseline at right angles (Y
direction).
•
[
]/[
]
: Press to decrease/increase the value by the
amount set in "Incr".
3. Press
[OK]
on the screen of step 2. The coordinate value of
the required point is calculated and displayed.
•
[REC]
: records the coordinate value as a known point data.
Recording method: "30.1 Registering/Deleting Known
• Press
[S-O]
to move to setting-out measurement of the
required point.
4. Press
{ESC}
. Continue the measurement (repeat steps
from 2).
PROCEDURE Offsetting the baseline
The baseline can be offset in three dimensions using four methods: lengthwise offset, lateral offset, height
offset ,and rotation angle offset.
1. Select “Point” in <Set-out line>
S e t - o u t l i n e
L i n e
O f f s e t
0 . 0 0 0
m
OK
I n c r
1 . 0 0 0 m
0 . 0 0 0 m
OFFSET
S e t - o u t l i n e
12.024
94.675
N
E
Z
111.796
REC
S-O
N
E
N
E
N
E
N
E
N
E
30
N
E
Lengthwise
offset
Lateral offset
Rotation
angle offset
Height
offset
S e t - o u t l i n e
P o i n t
L i n e