68
16. SETTING-OUT LINE
• Scale factor settings can be set in the screen shown at
right.
8. Press
[OK]
on the third screen of step 7 to define the
baseline. <Set-out line> is displayed. Move to setting-line
measurement.
"16.2 Setting-out Line Point"/"16.3 Setting-out Line Line"
• Press
[Sy=1]
to set scale factor y to “1”.
• Press
[1 : **]
to change the grade display mode to “1 : * * =
elevation : horizontal distance”.
• It is also possible to perform setting-out line measurement by pressing
[S-O LINE]
when allocated to the OBS
mode screen.
Allocating
[S-O LINE]
: "33.12 Allocating Key Functions".
Setting-out line point measurement can be used to find the required point coordinate by inputting the length
and offset based on the baseline.
• Before performing setting-out line point, the baseline must be defined.
PROCEDURE
1. Select “Point” in <Set-out line>
16.2 Setting-out Line Point
G r a d e
1:
%
O K
% - 2 . 6 6 9
A z m t h
H c a l c
H m e a s
S c a l e X
Sy=1
Sy=Sx
OK
1.000091
13.003m
17.294m
S c a l e Y 1.000091
93 20 31
S e t - o u t l i n e
P o i n t
L i n e
Baseline
1st Pt.
Length
X direction
Y direction
Offset
Required point
2nd Pt.
S e t - o u t l i n e
P o i n t
L i n e