Sokkia GCX3 Operator'S Manual Download Page 60

Page: 60 / 63

Waste Electrical and Electronic Equipment (WEEE) Directive

P/N: 1016293-01

Regulatory



Waste Electrical and Electronic Equipment (WEEE) Directive

Following information is for EU-member states only:

The use of the symbol below indicates that this product may not be treated as household waste. By

ensuring this product is disposed of correctly, to help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about the take-back and recycling of this product, please

contact a supplier where you purchased the product or consult.

Bluetooth Transmission

tatements/Compliance

This Bluetooth device is compliant to the following profiles of the core spec version 2.1/2.1+EDR:

•

Baseband

•

HCI

•

Link Manager

•

Radio

The radio has been tested using the maximum antenna gain of 2.3 dBi and the Bluetooth qualification

is valid for any antenna with the same or less gain.

Slovensy [Slovak]

(Sokkia)

týmto vyhlasuje, že

(GCX3)

spa základné požiadavky a všetky

príslušné ustanovenia Smernice 1999/5/ES.

Suomi [Finnish]

(Sokkia)

vakuuttaa täten että

(GCX3)

tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden

ehtojen mukainen.

Svenska

[Swedish]

Härmed intygar

(Sokkia)

att denna

(GCX3)

står I överensstämmelse med

de väsentliga egenskapskrav och övriga relevanta bestämmelser som

framgår av direktiv 1999/5/EG.

Summary of Contents for GCX3































































Search results

Summary of Contents for GCX3

Reviews:

Brands by name

Popular brands

Sokkia GCX3, Operator'S Manual

Search results

Summary of Contents for GCX3

Reviews:

Brands by name

Popular brands