Power Button (PWR)
12
P/N: 1016293-01
Display Panel Operations
Function
Press and Hold
Power Button
Description
Receiver
Powered
OFF
3–10 seconds
Battery LED Internal Power Only
—turns solid red until
Power Button is released. Once the Power Button is
released the Battery LED is
OFF.
See Table 8, “Battery LED
(BATT) Blink Patterns—RECEIVER IS POWERED
OFF/INTERNAL BATTERY IN USE” for additional
information.
Recording and Memory LED (REC)
—
OFF
,
Status LED
—
OFF
,
Bluetooth LED
—
OFF
Battery LED (BATT) External Power Source
Connected
—if the receiver is powered off and an external
power source is applied, the Battery LED
blinks
green and
begins charging.
Note
: When the battery is at full charge the Battery LED
will display a solid green LED.
See Table 8, “Battery LED (BATT) Blink Patterns—
RECEIVER IS POWERED OFF/EXTERNAL POWER SOURCE
CONNECTED TO RECEIVER” for additional information.
Factory Reset
Clear NVRAM
10–15 seconds
All LEDs are
OFF
. Release the Power Button when Status
LED is solid
red
.
Erase All Files
15–20 seconds
All LEDs are
OFF
. Release the Power Button when
Recording LED is solid
red
.
Note:
This action is irreversible. If unsure about these
actions, continue to hold down the button until all LEDs
return to normal.
Hardware
Shutdown/Reset
More than 35–50
seconds
Shuts down power of all internal components of the
receiver. This function is only recommended when the
receiver goes into
Exception
mode. This operation does
not affect internal memory or receiver settings.
Open/Close Data
File
Three times in a
row within 2
seconds
The data file opens in
Static
mode.
While the file is open, press the power button 2 times in a
row within 1 second to switch back and forth between
Static
and
Dynamic
modes.
To close a data file, press the power button 3 times in a row
within 2 seconds.
Refer to the Recording LED description.
Table 4. Power Button Functions
