Sokkia GCX3 Operator'S Manual Download Page 22

Page: 22 / 63

Receiver Status LEDs

P/N: 1016293-01

Display Panel Operations

Battery LED (BATT)

The Battery (BATT) LED indicates the remaining charge of the internal battery. When an external

power source is connected to the receiver the LED turns

green

and begins to blink when the battery

is charging.

Table 8. Battery LED (BATT) Blink Patterns

Display

Description

RECEIVER IS POWERED ON/INTERNAL BATTERY IN USE

GREEN

The charge is greater than 50%.

ORANGE

The charge is greater than 15%.

RED

The charge is less than 15%.

RECEIVER IS POWERED ON/EXTERNAL POWER SOURCE CONNECTED

GREEN

The battery LED blinks green and the internal battery is greater

than 50% charged. The battery is charging.

Note

: When the receiver is powered on—the battery LED will

always blink green when an external power source is

connected—until the battery is fully charged.

ORANGE

The battery LED is blinks orange. The internal battery is greater

than 15% charged. The battery is charging.

RED

The battery LED is blinks red. The internal battery is less than

15% charged. The battery is charging.

RECEIVER IS POWERED OFF/INTERNAL BATTERY IN USE

Battery LED is

OFF

Battery LED is

OFF

RECEIVER IS POWERED OFF/EXTERNAL POWER SOURCE CONNECTED

GREEN

The battery LED blinks green. The internal battery is charging.

Note

: When the receiver is powered off—the battery LED will

always blink green when an external power source is

connected—until the battery is fully charged.

Summary of Contents for GCX3































































Search results

Summary of Contents for GCX3

Reviews:

Brands by name

Popular brands

Sokkia GCX3, Operator'S Manual

Search results

Summary of Contents for GCX3

Reviews:

Brands by name

Popular brands