Title: MAN 266, GTecLink Dataloggers User Manual
Rev 1.0.0
Page 31 of 32
Configuration
4.3.3
Configuration requires specifying the excitation power voltage and the
warm up time for the sensors that need power supply (voltage and
current loop sensors).
For other sensors, 5V excitation supply is present in all channel
connectors.
Excitation power voltage can be 12V or 24V, and warm up times can be 100,
300 and 500 milliseconds or 1, 2, 5 and 10 seconds.
See section 2.3 for configuration of the radio communications of the data
logger.
Data Storage
4.3.4
Capacity for up to 130,000 readings with four sensors connected (Table 8).
Number of
sensors
Sampling rate
60 minutes
30 minutes
10 minutes
4
more than
10 years
7 years
2.4 years
Table 8: Indicative storage capacity of the Analog data logger. Estimates using four
sensors.
