Sogno CX, Quick Start Manual

Page: 17 / 24

Contents
16 ENGLISH
4.1.1 Receiver ....................................... 22
4.1.1.1 Connecting a Home
Network ..................................... 22
4.1.1.2 Setting up the BOX2IP
Server ....................................... 22
4.1.2 Mobile Device .............................. 23
4.2 Operation ..................................... 23
4.2.1 Live-TV on your TV Set ............... 23
4.2.2 smartSTREAM Mode (BOX2IP
Mode) .......................................... 23
4.2.3 HDTV Streaming ......................... 23
1 Safety Instructions
1.1 Intended Use
The HDTV satellite Receiver is intended for
private receiving of digital satellite television
(DVB-S/S2). It is exclusively intended for such
purpose and must be used exclusively for such
purpose.
Any other use is deemed to be unintended use.
1.2 Risks in Case of Intended Use
CAUTION!
Humidity, wrong mains volt-
age and/or wrong mains fre-
quency, lightning stroke or
mechanical overload may
cause malfunction of or dam-
age to the device.

Ensure that the receiver (in
particular the mains plug)
and the remote control are
not exposed to any humidi-
ty. Example: Do not place
filled flower vases or similar
onto the receiver.

Only connect the receiver
to 175…250 V ~, 50/60 Hz.

Disconnect mains plug in
case of thunderstorms or
malfunction.

Do not place heavy items
onto the receiver.

Do not bend or squeeze the
cable.
WARNING!
Risk of electric shock when
contacting mains voltage.
Damage to housing,
mains cable or improper
repair may result in con-
tact to mains voltage.

Do not place heavy items
onto the receiver.

Do not bend or squeeze
the cable.

Repairs of plug, cable or
receiver should only be
performed by qualified
specialists.
1.3 Grounding
The satellite antenna must be grounded
properly. Note the relevant VDE
7
regulations
8
.

It is recommended that the outdoor
unit of the satellite system should
be installed by a professional!
1.4 Location

Place the receiver onto a solid and level
surface.
 Protect the receiver from humidity, heat,
dust and dirt.

Do not place items filled with liquid, e.g.
flower vases, onto the receiver.
7 VDE = Verband der Elektrotechnik, Elektronik,
Informationstechnik (German) = Association for
Electrical, Electronic & Information Technologies
8
DIN EN 60728-11 VDE 0855-1:2011-06: Cable
networks for television signals, sound signals and
interactive services, Part 11: Safety
Installation of the Receiver
ENGLISH 17

Protect the receiver from dripping and
splash water.

Do not place burning items, e.g. burning
candles, onto the receiver.

Ensure sufficient ventilation (ventilation
slots must not be blocked): the receiver
should have a distance of at least five cen-
timeters to its surrounding elements on all
sides.

Ensure that the ventilation openings are
not covered by objects such as newspa-
pers, table cloths, curtains etc.

Only operate the receiver in moderate
climate (not in tropical climate).

Place the receiver so that the mains plug
can be disconnected at any time, corre-
spondingly disconnecting the device from
the mains.

If the device is transported from
cold to hot environment, then
condensing humidity may build
up in the device.

Do not connect the device, but
leave it switched-off for some
hours.
1.5 Handling of Batteries
• Batteries should always be out of chil-
dren's reach.
•
Leaking batteries cause damage to the
environment and the remote control.
• Batteries should not be exposed to ex-
treme heat, e.g. sunlight, fire etc.

Dispose of the batteries in accordance with
the applicable legal regulations.
1.6 Notes on Product Liability
In the following cases, the intended protection
of the device may be limited. Then, liability
regarding function of the device correspond-
ingly passes over to the operator:
• The device is not used in accordance with
the user manual.
• The device is used out of the field of appli-
cation as described above.
•
The operator performs unauthorized
changes of the device.
2 Installation of the Receiver
CAUTION!

First connect the receiver
to the satellite antenna
and any other devices be-
fore connecting the mains
plug to the power outlet.

Please also note the user
manuals of the other de-
vices.
2.1 Connection Scheme
default connection
optional connection

The schema is an example for re-
ceivers of the Mirage series. It de-
pends on the model, whether the
shown connections are available.
2.2 Connecting a Satellite Antenna

Connect the antenna cable to the receiver
connection LNB IN.
2.3 Connecting a TV Set
Depending on the connection possibilities of
your TV set, there are various possibilities to
connect TV set and receiver.
Home network