Softube AAX DSP, User Manual, Page: 70 / 182

70 | SPRING REVERB
User Interface
The Spring Reverb has the following controls: Mix, Springs, Tension, Shake, Bass, and Treble. The fol-
lowing pages will give you a brief description of all the controls.
Mix
Controls the balance between the reverb and the direct signal. Outputs only the origi-
nal signal when set to DRY, and only the reverb effect when set to WET.
Set this control to blend the wanted amount of reverb with the dry signal. Make sure
that you set Mix fully clock wise on WET every time you use Spring Reverb as a send
effect.
Springs
Controls the number of springs in use. There are three sets of springs in the reverb
unit and you can choose how many of the sets you would like to use.
Set the control to ONE for a more pronounced springy sound and to THREE for a
smoother sound.
Together with the Tension slider, this control is an excellent tool to change the overall
character of the reverb.
With
Springs
set to TWO and
Tension
in the left most position, you will get a typical Accutronics® Type 4 sound, as used in
many American guitar amps.
Tension Shake!
Bass Treble Springs Mix (Dry/Wet)