Softube AAX DSP, User Manual, Page: 156 / 182

156 | VINTAGE AMP ROOM
Knobs
The functionality of the knobs on the front panel of the plug in corresponds exactly to the front panel of the
real amplifier, except that we have added the foot switch as a “Vib-Trem Off-On” switch.
Vib-Trem Off-On
Turn on the vibrato or tremolo effect by moving this switch clock wise.
Vib-Trem Speed
Three way switch that sets the speed of the vibrato or tremolo effect.
Vib-Trem Switch
Select between a vibrato and a tremolo effect. Unlike the makers of the Brown amp,
the guys who built this amp actually knew the difference between a tremolo effect
(amplitude modulation of a signal) and a vibrato effect (frequency modulation of a
signal). Although this vibrato effect doesn’t sound anything like a real-world vibrato
(opera singer style vibrato), it’s a lovely effect that gives the sound that special touch.
Vib-Trem Volume
Volume control of the Vib-Trem channel. This channel is basically the only one of the
three channels that has any preamp distortion worth talking of.
Normal Volume
Volume control of the Normal channel. Except for the fuzz-like poweramp distortion
on higher volume settings, this channel is very clean and doesn’t change the guitar
sound so much.
Brilliant Volume
Volume control of the Brilliant channel, which has a much brighter sound than the
Normal channel.
Tone
The Tone knob cuts high frequencies when it’s turned clock wise.
Use the
vib-Trem volume
to get the distortion you want, and then use the
Normal
and
Brilliant volume
as a bass
and treble control. If you want a more fuzz-like distortion, use only the Normal and Brillant channel.