Softube AAX DSP, User Manual, Page: 155 / 182

SOFTUBE USER’S GUIDE | 155
Green Amp
Green is packed with character and produces a
pleasant guitar sound with warm yet intense power-
amp distortion. Its edginess makes it shine through
in mixes, without drowning out other instruments.
Green is based on a famous brit pop amplifier
from the middle of the 60’s. It has three different
channels (“Vib Trem”, “Normal” and “Brilliant”)
with two inputs each, and normally a guitar player
will connect the guitar to the “Vib Trem” input and
patch the signal to the other two channels. We have
simulated the amplifier exactly this way; the guitar
connected to the “Vib Trem” input and patched to
the other two channels.
To complicate things further, this amp doesn’t have
a normal tone stack (EQ) but a single tone control
which attenuates high frequencies when turned
clock wise (different to what one would expect of
a tone control). The previous owner of the original
Tone
Normal Ch.
Volume
Vib/Trem
Off/On
Vib/Trem
Switch
Vib/Trem Ch.
Volume
Brilliant Ch.
Volume
Vib/Trem
Speed
amp was so kind as to carve out “HI” and “LO” in
the metal panel so that he would remember this.
We have of course included this feature in Amp
Room.
First Use
Turn on the vibrato/tremolo effect (Vib-Trem
Off-On) and select the tremolo effect (Vib-
Trem Switch pointing at “Trem”). Set the
Vib-Trem Volume knob in the middle position
and all other knobs in the minimum position.
Now adjust the Brilliant Volume to get a good
balance between the tremolo effect and a clean
sound.