SOFTLINK WB169-RFG, Manual

Page: 6 / 38

2 Technical parameters overview
Overview of all WB169-RFG module technical parameters is shown in the Table 1 .
Table 1: Overview of WB169-RFG technical parameters
Transmitter and receiver parameters
Frequency band 169,400
÷
169,475 MHz
Modulation type 2GFSK, 4GFSK
No of channels in band 10
Transmission rate 2400, 4800, 19200 Baud
Receiver sensitivity -109 dBm
Reverse channel transmitting power 500 mW
Antenna connector SMA female
Communication protocol Wireless M-Bus
Communication mode (by EN 13757-4) N2
Communication interface GSM
Supported standards LTE-TDD B38/B40/B41
LTE-FDD B1/B3/B5/B7/B8/B20
UMTS/HSPA+ B1/B5/B8
GSM/GPRS/EDGEB3/B8
Antenna characteristic impedance 50 Ω
Antenna connector SMA female
Configuration interface USB
Transmission speed 115 200 Baud
Operation mode asynchronous
Transmission rate 8 data bits, 1 stop bit, none parity
Connector mini USB 2.0
Optical configuration interface
Transmission speed 115 200 Baud
Optical band 870 nm
Optical interface specification IrPHY 1.4 standard
Power supplying
External power supply (12
÷
24) V
Input power 3 W
Weight and dimensions
Width 70 mm
Height 90 mm
Depth 58 mm
Weight cca 200 g
DIN case 4 modules
SIM-card format (15x12x0,76)mm)
”
Micro-SIM”
Storing and installation conditions
Installation environment (CSN 33 2000-3) normal AA6, AB4, A4
Operating temperatures range (-10
÷
50)
◦
C
Storage temperatures range (0
÷
70)
◦
C
Relative humidity 90 % (no condensation)
Degree of protection IP20
WB169-RFG 3