SOFTLINK WB169-RFG, Manual

Page: 11 / 38

GW33H7-0#?
Help :
--- System commands ---
ta : Show tasks
mb : Show mail boxes
du addr : Dump memory
rb addr : Read byte from addr
rw addr : Read word from addr
rd addr : Read dword from addr
sb addr val : Set byte on addr
sw addr val : Set word on addr
sd addr val : Set dword on addr
port : Show port [a,b,..]
usb : Show usb registers
rng : Show rng number
show : show info
time : Show or set rtc time, set as BCD : 0x102033 is 10:20:33
date : Show or set rtc date, set as BCD : 0x171231 is 2017-12-31
uptime : Show uptime
reset : Reset device
te : Test tsSend
fs : Test FS
ppm : Set RTC ppm
free : Show free memory
users : Show users
useradd : create users passwd
userdel : delete users
userpass : change user’s password
cfgserver : Config server IP
cfgport : Config server port
usecfgserver : Use config server, 0 - no, 1 - yes
nepserver : Default NEP server IP
nepport : Default NEP server port
--- Utils ---
loca : location (0-63 chars)
ekey : Set encrypt key, point ’.’ no encrypt
serialkey : Set index for serial key, 0 - disabled
nepkey : Set index for nep key, 0 - disabled
write : Write configuration to flash
cread : Read configuration from flash
clear : Clear configation and load defaults
ping : Send ICMP ping to address
sens : show sensors values
deb : set debug
ls : show all config file names
rm : delete file
mkdir : create dir
cat file : show config file
mount : mount sd
unmount : unmount sd
deb : set debug
? : Show this help
sys : System commands
disp : Display command
ip : IP commands
gsm : GSM command
gw : gateway command
cc : cc1120 commands
hist : history table command
ntp : NTP command
GW33H7-0#
WB169-RFG 8